Built for Rotax engines, not adapted from a Lycoming tool
The most popular telemetry analysers were born for American air-cooled aircraft engines. A Rotax has two ignition circuits, two carburettors, mixed cooling and oil that must reach 100 °C. These four checks exist only here.
A/B ignition check at 4000 rpm
Finds the run-up on its own, measures each circuit's rpm drop (300 rpm max, 115 rpm max difference) and spots the cylinder whose EGT does not rise: a faulty spark plug or plug cap. On 912iS / 915iS / 916iS it checks ECU lanes A/B.
Bing carburettors: left vs right bank
Compares right-bank EGTs (cyl. 1-3) with the left bank (cyl. 2-4) at mid power and full throttle. Tells a synchronisation job apart from a needle, float or jet to inspect.
100 °C oil condensation check
Checks that the oil goes above 100 °C: below that, condensation water stays in the sump. Flight after flight it tells you when to fit the winter baffle on the cooler.
Student Engine-Care Index for flight schools
A 0-100 score per flight: cold-oil take-offs, high rpm on a cold engine, prolonged take-off power, thermal shock in descent. The fleet dashboard shows who treats the engines well.
How it works
Download the log from your EFIS SD card or USB stick.
Upload it here: the format is detected automatically and the flight split into 6 phases.
Read the traffic light. Unlock the details or the Pre-Purchase Report when you need them.